
Masterpieces
Each Masterpiece is made once, by hand, and never repeated. The next could be made for you.
Discover our Masterpieces
Crafting a masterpiece

I
Inspiration
& Design
Every piece begins with something worth remembering: the animals of the safari and the desert, birds, fish and flowers, or the romance of another age, the Jazz Age, the Imperial court, the old gentlemen’s club. What matters is meaning: a creature that stands for a family, a memory to be handed down.
The idea is talked through at the family table and drawn. Each piece is then broken down into its parts, a head, a hinge, a single stone, and every part is given its own drawings, makers and record, before it goes to CAD, to our sculptors or to the bench.
II
Modelling
& Sculpting
From the drawings, the piece is sculpted. The house works with two hands at once: by hand, in wax and clay, and digitally, by sculptors who trained first as wax carvers. Some figures take hundreds of hours before anything is cast.
Every model is printed or carved at full scale, then studied, adjusted and studied again, so that a face, a feather or a scale of armour reads exactly as it should. Only then are the moulds taken.


III
Goldsmithing & Silversmithing
The models are cast in Sterling Silver, Gold or Bronze, and the long work of the bench begins. Each casting is filed, chased and assembled by hand, and every joint is soldered and cleaned until it disappears.
Parts that must move, claws and tails, hinges, drawers and turning stages, are articulated and fitted until they move as they should, and keep doing so for years. It is the longest stage of all, and the one that decides whether a piece will last.
IV
Setting & Inlay
Then come the stones and the materials. Our setters place every stone by hand, from a single certified gem to thousands of Sapphires graded one by one from light to dark.
Inlay is part of the same craft: Mother of Pearl, Onyx, Quartz, Jade and Lapis Lazuli, cut and fitted by hand, as much in a ring or a pendant as in the panels of a cabinet, alongside rare timbers and exotic leathers where a piece calls for them. Jewellery and objects are made the same way, only at a different scale, and each material is chosen for the part it will play, as Pedro has chosen stones for half a century.


V
Finishing
Finally, every surface is finished by hand. Metals are polished and then plated, often in several layers: Yellow, Rose or White Gold, Cobalt Gold, Platinum, Palladium, Rhodium or Black Ruthenium, and even Silver laid over Silver for a richer tone. Others are given an antique patina, and lacquer is laid on coat after coat, polished between each. It is in these small details, layer upon layer, that a piece finds its depth.
The reverse of a piece, the inside of a drawer and the underside of a base receive the same care as the face, because the one who owns it will see them. Before it leaves the atelier, every piece is inspected by the family.







